Maximus-3 Smittybilt 98612 XRC GEN3 12K Winch Package; Wrangler JL & Gladiator JT w/ Steel Bumper Group

This all-inclusive winch mount kit includes everything you need to put the Smittybilt 98612 XRC GEN3 12K Winch w/ Synthetic Rope in the "winch ready" factory steel bumper found on many Rubicons and specialty trim packages for the Wrangler JL & Gladiator JT. Whether you have a Rubicon, 4xe, or a Mojave Gladiator with the Steel Bumper Group, this winch mount kit takes the guesswork out of choosing the right part for your steel bumper. The kit includes the Smittybilt 98612 XRC GEN3 12K Winch and the Maximus-3 frame-mounted winch mount giving you everything you need to go from no winch to ready to recover on the trail adeptly.

Maximus-3 Winch Mount Details

This winch mount includes everything you need to install a winch in the "winch-ready" factory steel bumper found on many Rubicons and specialty trim packages for the Wrangler JL & Gladiator JT. Whether you have a Rubicon, 4xe, or a Mojave Gladiator with the Steel Bumper Group, this winch mount takes the guesswork out of choosing the right part for your steel bumper. This inboard chassis-secured winch mount is built to the Warn specification of 1/4" thick one-piece heavy gauge steel in a laser-cut, press brake, and welding process. Cleverly engineered to provide a structurally sound mount for your winch, this is the most tried and true winch mount on the market and has been trusted by RubiTrux for years on both our customer builds well as our own. This winch mount kit for the Wrangler JL & Gladiator JT Steel Bumper Group factory steel bumper includes everything needed to install about every winch available on the market.

Maximus-3 Winch Mount Specifications:

• Designed Specifically for Wrangler JL & Gladiator JT Factory Steel Bumper Group Front Bumpers
• Made from One-Piece Heavy Gauge Bent Steel Plate with a Laser Cut, Press Break, and Welding Process
• Designed to Fit Warn Zeon, Warn VR, Smittybilt X20, Smittybilt XRC GEN3, Superwinch SX, as well as other Small Body Winches
• Mounts Directly to the JL & JT Chassis Frame
• Durable Satin Black Powder Coat
• Winch Plate Kit Weight - 24 lbs.
• 12,000 lb. Load Rating
• Made in The United States

Smittybilt 98612 XRC GEN3 12K Details:

Faster, Stronger, Easiest to Use. The Smittybilt XRC GEN3 line of winches has been completely redesigned from the ground up with innovative, user-friendly features and improved power efficiency. The 7 horsepower motor brings an average line speed increase of 12% over its GEN2 counterpart, adding more speed and power with less AMP draw while under load. The ergonomic remote controller integrates a Load Indicator Warning System, so you will always know how much your equipment can handle. Recovery in dark conditions is a breeze with the remote’s built-in flashlight; when additional light is needed, a 12-volt power post is located on the control box meaning you are ready for anything. Two magnets are built into the controller for convenient placement on steel surfaces, leaving it out of the way when not needed. A high-visibility clutch lever features large lettering, allowing you to see whether your winch is engaged or free spooled at a glance. The XRC GEN3 line of winches are backed by a lifetime mechanical warranty and a 5-year electrical warranty.

Smittybilt 98612 XRC GEN3 12K Specifications:

• 5.2 ft. per Minute Line Speed at 12,000 lbs.
• 375 Amp Draw at 12,000 lbs. of Load
• 12,000 lb. Rated Line Pull
• Powered by an Industry-Best 7HP Motor
• Faster Line Speed Compared to the GEN2 Series
• New, Innovative Load Indicator Warning System
• Lighting Built-in for Dark & Nighttime Recovery
• High-Viz Clutch Lever
• Dual Magnet Mounts & Flashlight Built-in to the Controller
• Relocatable Control Box w/ 12V Accessory Power Post
• Detachable & Customizable Body Armor
• Daytime Running Light
• 3-Stage Planetary Gear System
• Forged Gears & Silicon Steel Plate Rotor
• IP67 International Waterproof Rating
• Aluminum Hawse Fairlead
• Clutch Type - Sliding Ring Gear
• Gear Reduction Ratio - 173:1
• Braking - Automatic In-the-Drum
• Synthetic Rope Specs - 7/16 in. x 90 ft.
• Overall Dimensions - 21.7 in. x 6.7 in. x 8.3 in.
• Weight - 71 lbs.
• 650 CCA Battery Recommended
• 12 ft. Remote Lead
• 5 Year Electrical Warranty
• Lifetime Mechanical Warranty