Smittybilt 97612 XRC GEN3 12K Winch w/ Steel Rope
- 5.2 ft. per Minute Line Speed at 12,000 lbs.
- 375 Amp Draw at 12,000 lbs. of Load
- Powered by an Industry-Best 7HP Motor
- Faster Line Speed Compared to the GEN2 Series
- New, Innovative Load Indicator Warning System
- Lighting Built-in for Dark & Nighttime Recovery
Faster, Stronger, Easiest to Use. The Smittybilt XRC GEN3 line of winches has been completely redesigned from the ground up with innovative, user-friendly features and improved power efficiency. The 7 horsepower motor brings an average line speed increase of 12% over its GEN2 counterpart, adding more speed and power with less AMP draw while under load. The ergonomic remote controller integrates a Load Indicator Warning System, so you will always know how much your equipment can handle. Recovery in dark conditions is a breeze with the remote’s built-in flashlight; when additional light is needed, a 12-volt power post is located on the control box meaning you are ready for anything. Two magnets are built into the controller for convenient placement on steel surfaces, leaving it out of the way when not needed. A high-visibility clutch lever features large lettering, allowing you to see whether your winch is engaged or free spooled at a glance. The XRC GEN3 line of winches are backed by a lifetime mechanical warranty and a 5-year electrical warranty.
Smittybilt 97612 XRC GEN3 12K Specifications:
- 5.2 ft. per Minute Line Speed at 12,000 lbs.
- 375 Amp Draw at 12,000 lbs. of Load
- 12,000 lb. Rated Line Pull
- Powered by an Industry-Best 7HP Motor
- Faster Line Speed Compared to the GEN2 Series
- New, Innovative Load Indicator Warning System
- Lighting Built-in for Dark & Nighttime Recovery
- High-Viz Clutch Lever
- Dual Magnet Mounts & Flashlight Built-in to the Controller
- Relocatable Control Box w/ 12V Accessory Power Post
- Detachable & Customizable Body Armor
- Daytime Running Light
- 3-Stage Planetary Gear System
- Forged Gears & Silicon Steel Plate Rotor
- IP67 International Waterproof Rating
- Roller Fairlead
- Clutch Type - Sliding Ring Gear
- Gear Reduction Ratio - 173:1
- Braking - Automatic In-the-Drum
- Steel Cable Specs - 23/64 in. x 94 ft.
- Overall Dimensions - 21.7 in. x 6.7 in. x 8.3 in.
- Weight - 94 lbs.
- 650 CCA Battery Recommended
- 12 ft. Remote Lead
- 5 Year Electrical Warranty
- Lifetime Mechanical Warranty